Promise pegasus r4 drives blue lights solid

#PROMISE PEGASUS R4 DRIVES BLUE LIGHTS SOLID UPGRADE#
#PROMISE PEGASUS R4 DRIVES BLUE LIGHTS SOLID FULL#

So IвЂ™ve almost completed your steps above (itвЂ™s synchronizing now, then last step is disk utility resize). Howard вЂ“ many thanks for your guide! My lowly 6TB R2 was getting full, and frankly вЂ“ after 5 years in service I was getting just a little nervous.

As Disk Utility continues to grind through the laborious repair process, I can only hope that works. So it is probably worth repairing the existing 3 TB volume before trying to expand its size. At the end of that, it told me that one of the tables was too small, quit, and left the volume set at 3 TB size.

#PROMISE PEGASUS R4 DRIVES BLUE LIGHTS SOLID FULL#

In practice Disk Utility then performs a full check (not repair) of the file system, several hours more of intense disk thrashing. Once that is complete, your Pegasus RAID should then provide you with the full 6 TB of storage.Д«ut before you can turn Time Machine backups on again, you have to use Disk Utility to resize the RAID logical drive under the Macintosh Extended (HFS+) file system. However, it kicks off the next step in the process, which is for the physical drives to synchronise вЂ“ and that will take several hours. If you then check the Events log in detail, you will see that the migration itself takes almost no time at all. Promise Utility is unusual in the way that it requests confirmation of actions which are potentially destructive of data: you have to type the word CONFIRM in this dialog, then click on the Confirm button, before the process can start. Once happy that it is correct, click on the Submit button. You get a chance to check and confirm the proposed migration. As there is no change in RAID Level, that popup menu is left as it is, but you must check the Expand box and enter the desired capacity of 6 TB. First you need to check the box at the left, to enable the migration settings. As all four physical drives are part of that array, there is no need to select a drive either, so just click the Next button to accept those defaults.Д¬onfiguring the migration is a bit more complex, and the defaults will do nothing. In my case, as I have just the one array, there is no choice: DA0. The first task then is to select the disk array to migrate. The Promise Utility app does that from its Background Activities tool: simply click on the Start button in the Migration section. But to achieve that, I had to migrate the RAID to the new, larger size.

I repeated that until all four of the drives were new 2 TB units.ДЄfter the fourth and final rebuild, I had the same 3 TB logical drive on four 2 TB drives, which were actually capable of delivering a net total of 6 TB storage. Once the first new drive had been rebuilt, I shut the system down, popped the next old drive out, replaced it with a new 2 TB unit, and rebuilt the RAID again. Because I am using Level 5 RAID, one out of the four drives can fail without incurring any data loss, so the remaining three drives can always rebuild a fourth. Once they arrived, I popped the dead drive first, replaced it with a new 2 TB unit, powered the RAID up, and set it to rebuild the new drive. Rather than keep replacing 1 TB drives, I decided that it was time to replace all four drives with new 2 TB units. Holding my Time Machine backup drive and configured as a Level 5 array, its 3 TB space had been steadily eaten away until less than 450 GB were remaining.

#PROMISE PEGASUS R4 DRIVES BLUE LIGHTS SOLID UPGRADE#

My upgrade was rather forced on me, when the original four 1 TB hard drives started to fail after more than four years of continuous and quite heavy use. If you have a hardware RAID system like the Promise Pegasus R4, how easy is it to increase its drive capacity non-destructively?

Promise pegasus r4 drives blue lights solid